MCP1321T-29KE/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2012 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | Simple Reset/Power-On Reset |
| Max Power Dissipation | 240mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MCP1321 |
| Output | Open Drain, Push-Pull |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 240mW |
| Max Supply Current | 10μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.9V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.857V |
| Max Reset Threshold Voltage | 2.944V |
| Undervoltage Threshold | 2.857V |
| Overvoltage Threshold | 2.944V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP1321T-29KE/OT Overview
It is mounted through 5 terminals on the power management. This power ic is packaged in a way that looks like a Cut Tape (CT). For your reference, this IC power includes a list of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. In a 5V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. This power management has 5 pins. IC management can only work with a supply voltage of 1V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. While this power management is operating, it will output Open Drain, Push-Pull as the output voltage. The supervisor's supply current is specified to 10μA. To find similar IC managements from the manufacturer, you can always search by MCP1321. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 10μA.
MCP1321T-29KE/OT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current
MCP1321T-29KE/OT Applications
There are a lot of Microchip Technology MCP1321T-29KE/OT Voltage Supervisors applications.
- Functional modules
- Satellite navigation
- Detection of phase imbalance
- Cloud computing
- Unattended substation automation
- DC stabilized power supply module
- Multi-voltage system
- Urban rail transit weak current power monitoring
- DSP
- Rechargeable batteries
