MCP1321T-29LE/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 240mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1321 |
| Output | Open Drain, Push-Pull |
| Pin Count | 5 |
| Output Voltage | 300mV |
| Max Output Current | 10mA |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 240mW |
| Max Supply Current | 10μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.9V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Nominal Input Voltage | 5.5V |
| Min Reset Threshold Voltage | 2.857V |
| Max Reset Threshold Voltage | 2.944V |
| Threshold Voltage | +2.9V |
| Undervoltage Threshold | 2.857V |
| Overvoltage Threshold | 2.944V |
| Height | 1.2954mm |
| Length | 3.0988mm |
| Width | 1.8034mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1321T-29LE/OT Overview
As you can see, this power management is mounted through 5 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. IC management is specified that the package peak reflow temperature should be 260. Power management conducts at a voltage of 1. Surface Mount mounts power management on the wall. There is a subcategory of this power ic known as Power Management Circuits. In total, the power management has 5 pins in it. 5 pins make up the power management. Supply voltage (Vsup) should be at least 1V for this power management. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain, Push-Pull. In order to maintain a stable supply current for the power management, 10μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using MCP1321, the base power ics number. The maximum supply temperature is 10μA.
MCP1321T-29LE/OT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current
MCP1321T-29LE/OT Applications
There are a lot of Microchip Technology MCP1321T-29LE/OT Voltage Supervisors applications.
- Important electronics for automotive protection
- Embedded computing
- DSP
- Computer applications
- Smartphones
- Microprocessor system
- Power distribution systems of infant care room
- Telecommunications equipment
- Transformer load monitoring equipment
- Medical-specific insulation monitor
