MCP1321T-46CE/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2012 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | Simple Reset/Power-On Reset |
| Max Power Dissipation | 240mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MCP1321 |
| Output | Open Drain, Push-Pull |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 240mW |
| Max Supply Current | 10μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.6V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1ms Minimum |
| Min Reset Threshold Voltage | 4.531V |
| Max Reset Threshold Voltage | 4.669V |
| Undervoltage Threshold | 4.531V |
| Overvoltage Threshold | 4.669V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
MCP1321T-46CE/OT Overview
Power management is mounted through 5 terminals. It is packaged with Cut Tape (CT). Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. IC management conducts at a voltage of 5V. IC management conducts in a 1-voltage supply. Using Surface Mount, IC management is mounted. There are 5 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. During operation, this power management system outputs Open Drain, Push-Pull. The supervisor's supply current is specified to 10μA. It is always advisable to use MCP1321, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management can work with a maximum supply temperature of 10μA.
MCP1321T-46CE/OT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current
MCP1321T-46CE/OT Applications
There are a lot of Microchip Technology MCP1321T-46CE/OT Voltage Supervisors applications.
- Multi-voltage system
- emergency room
- Cloud computing
- Solar power charger
- Efficient information transmission
- Unattended substation automation
- Microprocessor system
- Sensitive sensors
- Display equipment
- Set top box
