MCP1321T-46LE/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 240mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1321 |
| Output | Open Drain, Push-Pull |
| Pin Count | 5 |
| Output Voltage | 300mV |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 240mW |
| Max Supply Current | 10μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.6V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Nominal Input Voltage | 5.5V |
| Min Reset Threshold Voltage | 4.531V |
| Max Reset Threshold Voltage | 4.669V |
| Threshold Voltage | +4.6V |
| Undervoltage Threshold | 4.531V |
| Overvoltage Threshold | 4.669V |
| Height | 1.2954mm |
| Length | 3.0988mm |
| Width | 1.8034mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1321T-46LE/OT Overview
As you can see, this power management is mounted through 5 terminals. Power management is packaged in a Tape & Reel (TR) way. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. Power ics operate at 1 supply voltages. The power management is mounted by Surface Mount. There is a subcategory called Power Management Circuits for this power management. Power management has a total of 5 pins. There are 5 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain, Push-Pull. The supply current of the power management is 10μA. To find similar IC managements from the manufacturer, you can always search by MCP1321. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 10μA.
MCP1321T-46LE/OT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current
MCP1321T-46LE/OT Applications
There are a lot of Microchip Technology MCP1321T-46LE/OT Voltage Supervisors applications.
- Battery cars
- Electrical fire monitoring system
- Power distribution systems of operating room
- Sensitive sensors
- Solar power charger
- Kitchen appliances
- Battery-powered equipment
- Consumer electronics
- Unattended substation automation
- Microcontroller system
