MCP1403-E/MF
| Parameters | |
|---|---|
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1403 |
| Pin Count | 8 |
| Max Output Current | 4.5A |
| Nominal Supply Current | 2mA |
| Max Supply Current | 2mA |
| Propagation Delay | 48 ns |
| Input Type | Inverting |
| Turn On Delay Time | 48 ns |
| Rise Time | 28ns |
| Fall Time (Typ) | 28 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.065 μs |
| Output Peak Current Limit-Nom | 4.5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4.5A 4.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.065 μs |
| Height Seated (Max) | 1mm |
| Length | 5.99mm |
| Width | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
MCP1403-E/MF Overview
In order to increase flexibility, the package 8-VDFN Exposed Pad is used.A packaging method of Tube is used.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Surface Mount is mounted in the way of the device.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.-40°C~150°C TJ is the allowed temperature range for this device.Inverting is used as the input type in this program.8 terminations constitute its foundation.Numerous related parts can be found under its base part number MCP1403.In this case, Surface Mount indicates how the device is mounted.There are 8 pins available in the device.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.There is a maximum output current of 4.5A that can be achieved.This subcategory of MOSFET Drivers has a number of useful electronic components.The board has a total of 8 component pins.In order to ensure greater stability, it is recommended to keep the supply current at 2mA.
MCP1403-E/MF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP1403-E/MF Applications
There are a lot of Microchip Technology MCP1403-E/MF gate drivers applications.
- Motor Controls
- Portable Media Players
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Video amplifiers
- Dual-Battery Systems
- Commercial and agricultural vehicles (CAV)
- Active filtering
- Industrial Modules
- Digitally controlled power supplies
- Solar power supplies
