MCP1403-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1403 |
| Pin Count | 8 |
| Output Voltage | 25mV |
| Max Output Current | 4.5A |
| Number of Channels | 1 |
| Nominal Supply Current | 2mA |
| Output Current | 4.5A |
| Max Supply Current | 2mA |
| Propagation Delay | 48 ns |
| Input Type | Inverting |
| Turn On Delay Time | 48 ns |
| Rise Time | 28ns |
| Fall Time (Typ) | 28 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.065 μs |
| Output Peak Current Limit-Nom | 4.5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4.5A 4.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.065 μs |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1403-E/SN Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.Gate drivers is packaged in the way of Tube.The configuration is supported by 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.By using 4.5V~18V supply voltage, it is able to demonstrate its superiority.There is a gate type of IGBT, N-Channel, P-Channel MOSFET in this design.For this device, the temperature range is -40°C~150°C TJ.Mosfet driver uses Inverting as Mosfet drivers input type.Initially, the configuration is composed of 8 terminations.Under its base part number MCP1403, various related parts can be found.In this case, Surface Mount indicates how the device is mounted.When designing, the device is configured with 8 pins.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.4.5A is the maximum output current.There are several useful electronic components found in its subcategory of MOSFET Drivers.There are 8 component pins on the board.Mosfet gate drivers supports a current output of 4.5A.To ensure high stability, the supply current should be kept at 2mA.In this case, the voltage is 25mV.Operation of the device is limited to 1 channels.
MCP1403-E/SN Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP1403-E/SN Applications
There are a lot of Microchip Technology MCP1403-E/SN gate drivers applications.
- Motor Controls
- A/D drivers
- White Goods - Air Conditioner, Washing Machine,
- Industrial motor drives - compact, standard, premium, servo drives
- General Purpose 3-Phase Inverter
- Portable Media Players
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- DC/DC converters
- High frequency line drivers
- 3-Phase Motor Inverter Driver
