MCP1403-E/SO
| Parameters | |
|---|---|
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1403 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Max Output Current | 4.5A |
| Power Supplies | 4.5/18V |
| Nominal Supply Current | 2mA |
| Max Supply Current | 2mA |
| Propagation Delay | 48 ns |
| Input Type | Inverting |
| Turn On Delay Time | 48 ns |
| Rise Time | 28ns |
| Fall Time (Typ) | 28 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.065 μs |
| Output Peak Current Limit-Nom | 4.5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4.5A 4.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.065 μs |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
MCP1403-E/SO Overview
The 16-SOIC (0.295, 7.50mm Width) package offers greater flexibility.Tube represents the packaging method.Surface Mount is the way in which it is mounted.In the absence of a power supply voltage of 4.5V~18V V, it is able to demonstrate its superiority.A gate type of IGBT, N-Channel, P-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Inverting is used as the input type.Mosfet driver is based on 16 terminations.Numerous related parts can be found under its base part number MCP1403.Surface Mount is the way it takes to mount the device.When designing, the device is configured with 16 pins.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 4.5A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.A board with 16 component pins is available.The basis of this system consists of 2 outputs.As a precaution, make sure the supply current is kept at 2mA.The power supply of 4.5/18V is able to solve the power supply problems for a wide variety of applications.
MCP1403-E/SO Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
16 pins
MCP1403-E/SO Applications
There are a lot of Microchip Technology MCP1403-E/SO gate drivers applications.
- Motor Drives
- Portable Media Players
- General Purpose 3-Phase Inverter
- Dual-Battery Systems
- High-speed communications
- High-voltage isolated DC-DC converters
- Commercial air-conditioning (CAC)
- Portable computers
- Head-up and Head mounted displays
- Industrial Motor Inverter - Power Tools, Robotics
