MCP1403T-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1403 |
| Pin Count | 8 |
| Max Output Current | 4.5A |
| Nominal Supply Current | 2mA |
| Max Supply Current | 2mA |
| Propagation Delay | 48 ns |
| Input Type | Inverting |
| Turn On Delay Time | 48 ns |
| Rise Time | 28ns |
| Fall Time (Typ) | 28 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.065 μs |
| Output Peak Current Limit-Nom | 4.5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4.5A 4.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.065 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP1403T-E/SN Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) is the packaging method.The configuration is supported by 2 drivers.There is a mounting bracket in the way of Surface Mount.A supply voltage of 4.5V~18V demonstrates its superiority.This device is designed with a IGBT, N-Channel, P-Channel MOSFET gate type.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.The input type is Inverting.Its configuration starts with 8 terminations.Under its base part number MCP1403, various related parts can be found.In this case, Surface Mount indicates how the device is to be mounted.At the time of design, it is configured with 8 pins.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 4.5A that can be achieved.There are various useful electronic components in its subcategory MOSFET Drivers.The number of component pins is 8.To maintain higher stability, the supply current should always be 2mA.
MCP1403T-E/SN Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP1403T-E/SN Applications
There are a lot of Microchip Technology MCP1403T-E/SN gate drivers applications.
- Topologies
- Smart Phones
- Solar power supplies
- High-speed communications
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Commercial and agricultural vehicles (CAV)
- Power factor correction (PFC) circuits
- Refrigerator
- PCMCIA applications
- General Purpose 3-Phase Inverter
