MCP1403T-E/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1403 |
| Pin Count | 16 |
| Max Output Current | 4.5A |
| Power Supplies | 4.5/18V |
| Nominal Supply Current | 2mA |
| Max Supply Current | 2mA |
| Propagation Delay | 48 ns |
| Input Type | Inverting |
| Turn On Delay Time | 48 ns |
| Rise Time | 28ns |
| Fall Time (Typ) | 28 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.065 μs |
| Output Peak Current Limit-Nom | 4.5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4.5A 4.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.065 μs |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP1403T-E/SO Overview
Its 16-SOIC (0.295, 7.50mm Width) package is adopted for higher flexibility.There is a package in the form of Tape & Reel (TR).This device is equipped with 2 drivers for its configuration.In this case, gate drivers is mounted along the way of Surface Mount.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.This device can operate at temperatures up to -40°C~150°C TJ.Inverting is used as the input type in this program.Initially, the configuration is composed of 16 terminations.Under its base part number MCP1403, various related parts can be found.The device is mounted using Surface Mount.As a result, it is configured with 16 pins when it is designed.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 4.5A volts.Its subcategory of MOSFET Drivers contains various useful electronic components.16 pins are present on the component.Mosfet gate drivers is recommended to keep the supply current at 2mA to ensure greater stabilMosfet gate driversy.Using its power supply of 4.5/18V, it provides solutions to diverse power supply problems.
MCP1403T-E/SO Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
16 pins
MCP1403T-E/SO Applications
There are a lot of Microchip Technology MCP1403T-E/SO gate drivers applications.
- Solar power supplies
- Welding
- Isolated Supplies for Motor Control
- Motor Controls
- Industrial Power Supplies
- Active Clamp Flyback or Forward and Synchronous Rectifier
- A/D drivers
- White Goods - Air Conditioner, Washing Machine,
- High-voltage isolated DC-DC converters
- Broadcast equipment
