MCP1404-E/MF
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1404 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 4.5A |
| Nominal Supply Current | 1mA |
| Max Supply Current | 2mA |
| Propagation Delay | 48 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 48 ns |
| Rise Time | 15ns |
| Fall Time (Typ) | 18 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.065 μs |
| Output Peak Current Limit-Nom | 4.5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4.5A 4.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.065 μs |
| Height | 950μm |
| Length | 4.92mm |
| Width | 5.99mm |
| RoHS Status | ROHS3 Compliant |
MCP1404-E/MF Overview
There is greater flexibility with the 8-VDFN Exposed Pad package.A packaging method of Tube is indicated.This device is equipped with 2 drivers for its configuration.Its recommended mounting way is Surface Mount.In the absence of a power supply voltage of 4.5V~18V V, it is able to demonstrate its superiority.IGBT, N-Channel, P-Channel MOSFET is the gate type used for this design.This device can operate at temperatures up to -40°C~150°C TJ.Non-Inverting is used as the input type.Mosfet driver is based on 8 terminations.The base part number MCP1404 refers to a number of related parts.You mount it with Surface Mount.When the device is designed, it has 8 pins.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 4.5A.This subcategory of MOSFET Drivers has a number of useful electronic components.The component has 8 pins.Mosfet gate drivers is recommended that you keep the supply current at 2mA in order to achieve greater stabilMosfet gate driversy.
MCP1404-E/MF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP1404-E/MF Applications
There are a lot of Microchip Technology MCP1404-E/MF gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- Motor Controls
- Portable Media Players
- Solar power supplies
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- High power buffers
- Portable computers
- Motor Drives
- Video amplifiers
- Industrial motor drives - compact, standard, premium, servo drives
