MCP1404-E/P
| Parameters | |
|---|---|
| Input Bias Current | 10μA |
| Turn On Time | 0.065 μs |
| Output Peak Current Limit-Nom | 4.5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4.5A 4.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.065 μs |
| Height | 4.953mm |
| Length | 10.16mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Base Part Number | MCP1404 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Max Output Current | 4.5A |
| Nominal Supply Current | 2mA |
| Output Current | 4.5A |
| Max Supply Current | 2mA |
| Propagation Delay | 48 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 48 ns |
| Rise Time | 28ns |
| Fall Time (Typ) | 28 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
MCP1404-E/P Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.Gate drivers is packaged in the way of Tube.Through Hole is mounted in the way.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.This gate type has a IGBT, N-Channel, P-Channel MOSFET design.This device allows temperatures in the range of -40°C~150°C TJ.A type of Non-Inverting is used for input in this program.There are 8 terminations to form the base of its configuration.Mosfet driver is possible to find various related parts under Mosfet drivers base part number MCP1404.You mount it with Through Hole.When the device is designed, it has 8 pins.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.Mosfet driver is possible to achieve a maximum output current of 4.5A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.8 pins are present on the component.Mosfet driver is based on a basis of 2 outputs that have been integrated.An output current of 4.5A is supported.In order to ensure greater stability, it is recommended to keep the supply current at 2mA.When this voltage is produced, it is marked as 18V.
MCP1404-E/P Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP1404-E/P Applications
There are a lot of Microchip Technology MCP1404-E/P gate drivers applications.
- 3-Phase Motor Inverter Driver
- Motor Controls
- High frequency line drivers
- serial peripheral interface (SPI), I2C
- Power factor correction (PFC) circuits
- LCD/LCoS/DLP portable and embedded pico projectors
- Motor Drives
- Portable Media Players
- General Purpose 3-Phase Inverter
- RGB applications
