MCP1404-E/SN
| Parameters | |
|---|---|
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4.5A 4.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.065 μs |
| Height | 1.4986mm |
| Length | 4.8768mm |
| Width | 3.9116mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1404 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 25mV |
| Max Output Current | 4.5A |
| Nominal Supply Current | 2mA |
| Output Current | 4.5A |
| Max Supply Current | 2mA |
| Propagation Delay | 48 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 48 ns |
| Rise Time | 28ns |
| Fall Time (Typ) | 28 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.065 μs |
| Output Peak Current Limit-Nom | 4.5A |
MCP1404-E/SN Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tube is indicated.Gate drivers is mounted in the way of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~18V.IGBT, N-Channel, P-Channel MOSFET is the gate type used for this design.This device allows temperatures in the range of -40°C~150°C TJ.Non-Inverting is used as the input type in this program.Its configuration is based on a total of 8 terminations.There are numerous related parts listed under its base part number MCP1404.Mosfet driver is mounted using the Surface Mount method.At the time of design, it is configured with 8 pins.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.The maximum output current can amount to 4.5A.Within this subcategory of MOSFET Drivers, there are several useful electronic components.The board has 8 component pins.In terms of its basis, there are 2 outputs integrated.The output current can be set to 4.5A.If you want a stable supply current, you should keep it at 2mA.When this voltage is produced, it is marked as 25mV.
MCP1404-E/SN Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP1404-E/SN Applications
There are a lot of Microchip Technology MCP1404-E/SN gate drivers applications.
- High-speed communications
- DC/DC converters
- High current laser/LED systems
- Isolated switch mode power supplies (SMPS)
- Industrial motor drives - compact, standard, premium, servo drives
- Uninterruptible Power Supplies (UPS)
- Video amplifiers
- Broadcast equipment
- serial peripheral interface (SPI), I2C
- Motor Controls
