MCP1404-E/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1404 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Max Output Current | 4.5A |
| Power Supplies | 4.5/18V |
| Nominal Supply Current | 2mA |
| Max Supply Current | 2mA |
| Propagation Delay | 48 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 48 ns |
| Rise Time | 28ns |
| Fall Time (Typ) | 28 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.065 μs |
| Output Peak Current Limit-Nom | 4.5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4.5A 4.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.065 μs |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP1404-E/SO Overview
For greater flexibility, its 16-SOIC (0.295, 7.50mm Width) package is used.A package of Tube has been used.Ideally, it should be mounted in the direction of Surface Mount.A supply voltage of 4.5V~18V demonstrates its superiority.This device is designed with a IGBT, N-Channel, P-Channel MOSFET gate type.There is a temperature range for this device of -40°C~150°C TJ.Mosfet driver accepts input of type Non-Inverting.Mosfet driver is based on 16 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number MCP1404.Devices are mounted by Surface Mount.A total of 16 pins are available on the device.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.4.5A is the maximum output current.Within this subcategory of MOSFET Drivers, there are several useful electronic components.A total of 16 pins are available for component connections.Mosfet driver is based on a basis of 2 outputs that have been integrated.For higher stability, the supply current should be kept at 2mA.Due to its 4.5/18V power supply, it can solve power supply problems for an array of diverse applications.
MCP1404-E/SO Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
16 pins
MCP1404-E/SO Applications
There are a lot of Microchip Technology MCP1404-E/SO gate drivers applications.
- Head-up and Head mounted displays
- Motor Control
- Isolated Supplies for Motor Control
- Industrial motor drives - compact, standard, premium, servo drives
- Isolated Supplies for controller area network (CAN),
- Commercial and agricultural vehicles (CAV)
- Motor controllers
- Automotive Applications
- Isolated Gate Driver Supplies
- Refrigerator
