MCP1405-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Base Part Number | MCP1405 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Max Output Current | 4.5A |
| Nominal Supply Current | 2mA |
| Output Current | 4.5A |
| Max Supply Current | 2mA |
| Propagation Delay | 48 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 48 ns |
| Rise Time | 28ns |
| Fall Time (Typ) | 28 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.065 μs |
| Output Peak Current Limit-Nom | 4.5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4.5A 4.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.065 μs |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1405-E/P Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.Gate drivers is package in Tube case.Through Hole is mounted in the way of the device.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.This device can operate at temperatures up to -40°C~150°C TJ.This program uses the input type of Inverting, Non-Inverting.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Many related parts can be found under its base part number MCP1405.You mount it with Through Hole.When designing, the device is configured with 8 pins.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.In the maximum case, the output current can be limited to 4.5A.Its subcategory of MOSFET Drivers contains various useful electronic components.The board contains 8 pins for component connections.Mosfet driver is based on a basis of 2 outputs that have been integrated.4.5A is the maximum output current supported by the device.Keeping the supply current at 2mA ensures greater stability.18V is the output voltage.
MCP1405-E/P Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP1405-E/P Applications
There are a lot of Microchip Technology MCP1405-E/P gate drivers applications.
- serial peripheral interface (SPI), I2C
- Motor Drives
- DC-DC Converters
- Broadcast equipment
- 3-Phase Motor Inverter Driver
- Telecom switch mode power supplies
- Motor controllers
- High current laser/LED systems
- Motor Controls
- UPS systems
