MCP1405-E/SN
| Parameters | |
|---|---|
| Channel Type | Independent |
| Turn On Time | 0.065 μs |
| Output Peak Current Limit-Nom | 4.5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4.5A 4.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.065 μs |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1405 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 25mV |
| Max Output Current | 4.5A |
| Nominal Supply Current | 2mA |
| Output Current | 4.5A |
| Max Supply Current | 2mA |
| Propagation Delay | 48 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 48 ns |
| Rise Time | 28ns |
| Fall Time (Typ) | 28 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
MCP1405-E/SN Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.The packaging method is indicated by Tube.Surface Mount is mounted in the way.By using 4.5V~18V supply voltage, it is able to demonstrate its superiority.There is a gate type of IGBT, N-Channel, P-Channel MOSFET in this design.In this device, temperatures must not exceed -40°C~150°C TJ.This program uses the input type of Inverting, Non-Inverting.Its configuration starts with 8 terminations.There are various parts that can be found under its base part number MCP1405.The mount method is Surface Mount.At the time of design, it is configured with 8 pins.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.The maximum output current can amount to 4.5A.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.On the board, there are 8 component pins.The basis of this model has 2 outputs integrated.Mosfet driver supports an output current of 4.5A.To increase stability, keep the supply current at 2mA.As a result, a voltage of 25mV is produced.
MCP1405-E/SN Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP1405-E/SN Applications
There are a lot of Microchip Technology MCP1405-E/SN gate drivers applications.
- Digitally controlled power supplies
- Industrial Modules
- Solar inverters
- Video amplifiers
- DC-DC Converters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Active filtering
- Telecom switch mode power supplies
- General Purpose 3-Phase Inverter
- Motor Controls
