MCP1405-E/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1405 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Max Output Current | 4.5A |
| Power Supplies | 4.5/18V |
| Nominal Supply Current | 2mA |
| Max Supply Current | 2mA |
| Propagation Delay | 48 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 48 ns |
| Rise Time | 28ns |
| Fall Time (Typ) | 28 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.065 μs |
| Output Peak Current Limit-Nom | 4.5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4.5A 4.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.065 μs |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP1405-E/SO Overview
The 16-SOIC (0.295, 7.50mm Width) package provides greater flexibility.There is a package in the form of Tube.There is a mounting bracket in the way of Surface Mount.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.This gate type has a IGBT, N-Channel, P-Channel MOSFET design.This device can operate at temperatures up to -40°C~150°C TJ.Mosfet driver uses Inverting, Non-Inverting as Mosfet drivers input type.There are 16 terminations to form the base of its configuration.You will find various related parts under the base part number MCP1405.Devices are mounted by Surface Mount.When the device is designed, it has 16 pins.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be limited to 4.5A.There are several useful electronic components in this subcategory of MOSFET Drivers.Components with 16 pins are available.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.Mosfet gate drivers is recommended that you keep the supply current at 2mA in order to achieve greater stabilMosfet gate driversy.Due to its power supply of 4.5/18V, it provides an effective solution to power supply problems for a wide range of applications.
MCP1405-E/SO Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
16 pins
MCP1405-E/SO Applications
There are a lot of Microchip Technology MCP1405-E/SO gate drivers applications.
- Power factor correction (PFC) circuits
- Portable computers
- Automotive Applications
- General Purpose 3-Phase Inverter
- Isolated Gate Driver Supplies
- Active filtering
- Motor Control
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- High power buffers
- RGB applications
