MCP1405T-E/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1405 |
| Pin Count | 16 |
| Max Output Current | 4.5A |
| Power Supplies | 4.5/18V |
| Nominal Supply Current | 2mA |
| Max Supply Current | 2mA |
| Propagation Delay | 48 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 48 ns |
| Rise Time | 28ns |
| Fall Time (Typ) | 28 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.065 μs |
| Output Peak Current Limit-Nom | 4.5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4.5A 4.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.065 μs |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP1405T-E/SO Overview
A higher level of flexibility is provided by its 16-SOIC (0.295, 7.50mm Width) package.The packaging method is indicated by Tape & Reel (TR).Gate drivers is configured wGate driversh 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.There is a gate type of IGBT, N-Channel, P-Channel MOSFET in this design.There is a temperature range for this device of -40°C~150°C TJ.Inverting, Non-Inverting is used as the input type.There are 16 terminations to form the base of its configuration.There are various parts that can be found under its base part number MCP1405.The device is mounted using Surface Mount.The pins are configured with 16 when designing the chip.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.There is an output current limit of 4.5A for this device.There are various useful electronic components in its subcategory MOSFET Drivers.The board has a total of 16 component pins.In order to ensure greater stability, it is recommended to keep the supply current at 2mA.With its power supplies of 4.5/18V, it solves the problems of power supply for a variety of applications.
MCP1405T-E/SO Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
16 pins
MCP1405T-E/SO Applications
There are a lot of Microchip Technology MCP1405T-E/SO gate drivers applications.
- Topologies
- Automotive Applications
- AC-DC Inverters
- Power factor correction (PFC) circuits
- Portable computers
- Motor Controls
- Portable Media Players
- 3-Phase Motor Inverter Driver
- Motor Drives
- A/D drivers
