MCP1406-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1406 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 25mV |
| Max Output Current | 6A |
| Nominal Supply Current | 250μA |
| Output Current | 6A |
| Max Supply Current | 250μA |
| Propagation Delay | 55 ns |
| Input Type | Inverting |
| Turn On Delay Time | 55 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.065 μs |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.065 μs |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1406-E/SN Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Tube represents the packaging method.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.There is a gate type of IGBT, N-Channel, P-Channel MOSFET in this design.This device allows temperatures in the range of -40°C~125°C TA.Inverting is used as the input type.There are 8 terminations to form the base of its configuration.Numerous related parts are available for its base part number MCP1406.You mount it with Surface Mount.As a result, it is configured with 8 pins when it is designed.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.An output current as high as 6A can be achieved at maximum power.Its subcategory of MOSFET Drivers contains various useful electronic components.The component has 8 pins.The basis of the model has 1 outputs integrated.This device is capable of delivering 6A current.As a precaution, make sure the supply current is kept at 250μA.A voltage of 25mV is output by this device.
MCP1406-E/SN Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP1406-E/SN Applications
There are a lot of Microchip Technology MCP1406-E/SN gate drivers applications.
- Broadcast equipment
- PCMCIA applications
- High power buffers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Telecom switch mode power supplies
- Welding
- Uninterruptible Power Supplies (UPS)
- High-speed communications
- Isolated Supplies for Motor Control
