MCP1406T-E/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1406 |
| Pin Count | 8 |
| Max Output Current | 6A |
| Nominal Supply Current | 250μA |
| Max Supply Current | 250μA |
| Propagation Delay | 55 ns |
| Input Type | Inverting |
| Turn On Delay Time | 55 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.065 μs |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.065 μs |
| Length | 6mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP1406T-E/MF Overview
A higher degree of flexibility is achieved by adopting its 8-VDFN Exposed Pad package.Tape & Reel (TR) is the form of the package.For its configuration, it incorporates 1 drivers.Surface Mount is the way in which it is mounted.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.IGBT, N-Channel, P-Channel MOSFET is the gate type used for this design.Mosfet driver is possible to use this device at temperatures as low as -40°C~125°C.Mosfet driver accepts input of type Inverting.Initially, the configuration is composed of 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number MCP1406.In this case, Surface Mount indicates how the device is to be mounted.The pins are configured with 8 when designing the chip.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.6A is the maximum output current.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board contains 8 pins for component connections.Keeping the supply current at 250μA ensures greater stability.
MCP1406T-E/MF Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP1406T-E/MF Applications
There are a lot of Microchip Technology MCP1406T-E/MF gate drivers applications.
- High current laser/LED systems
- Portable computers
- 3-Phase Motor Inverter Driver
- Digitally controlled power supplies
- RGB applications
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Refrigerator
- Head-up and Head mounted displays
- Dual-Battery Systems
- AC-DC Inverters
