MCP1407-E/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1407 |
| Pin Count | 8 |
| Max Output Current | 6A |
| Nominal Supply Current | 250μA |
| Output Current | 6A |
| Max Supply Current | 250μA |
| Propagation Delay | 55 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Turn-Off Delay Time | 50 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.065 μs |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.065 μs |
| Height | 1mm |
| Length | 5mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1407-E/MF Overview
Its 8-VDFN Exposed Pad package provides greater flexibility.The packaging method is indicated by Tube.1 drivers are incorporated for its configuration.Gate drivers is mounted in the way of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.Gate drivers is designed wGate driversh a IGBT, N-Channel, P-Channel MOSFET gate.In this device, temperatures must not exceed -40°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.There are 8 terminations to form the base of its configuration.Many related parts can be found under its base part number MCP1407.The mount method is Surface Mount.The pins are configured with 8 when designing the chip.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.6A is the maximum output current.There are several useful electronic components found in its subcategory of MOSFET Drivers.The board contains 8 pins for component connections.This device is capable of delivering 6A current.To ensure high stability, the supply current should be kept at 250μA.
MCP1407-E/MF Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP1407-E/MF Applications
There are a lot of Microchip Technology MCP1407-E/MF gate drivers applications.
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Dual-Battery Systems
- Refrigerator
- Industrial Modules
- Portable computers
- Video amplifiers
- Telecom switch mode power supplies
- Digitally controlled power supplies
- High-voltage isolated DC-DC converters
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
