MCP1407-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Base Part Number | MCP1407 |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Max Output Current | 6A |
| Nominal Supply Current | 250μA |
| Output Current | 6A |
| Max Supply Current | 250μA |
| Propagation Delay | 55 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 55 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1407-E/P Overview
Its 8-DIP (0.300, 7.62mm) package provides greater flexibility.Tube represents the package.Through Hole is the way in which it is mounted.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate drivers is designed wGate driversh a gate type of IGBT, N-Channel, P-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~150°C TJ.The input type for this program is Non-Inverting.Initially, the configuration is composed of 8 terminations.There are various parts that can be found under its base part number MCP1407.The device is mounted with Through Hole.A total of 8 pins are available on the device.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible to achieve a maximum output current of 6A.Its subcategory of MOSFET Drivers contains various useful electronic components.Mosfet driver has been integrated wMosfet driverh a total of 1 outputs for Mosfet drivers basis.The output current of this device can be set to 6A.Mosfet gate drivers is recommended that you keep the supply current at 250μA in order to achieve greater stabilMosfet gate driversy.The voltage it outputs is 18V.
MCP1407-E/P Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP1407-E/P Applications
There are a lot of Microchip Technology MCP1407-E/P gate drivers applications.
- PCMCIA applications
- General Purpose 3-Phase Inverter
- Line drivers
- Video amplifiers
- Solar inverters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High-voltage isolated DC-DC converters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Smart Phones
- Motor Control
