MCP1407T-E/MF
| Parameters | |
|---|---|
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.065 μs |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.065 μs |
| Length | 6mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1407 |
| Pin Count | 8 |
| Max Output Current | 6A |
| Nominal Supply Current | 250μA |
| Max Supply Current | 250μA |
| Propagation Delay | 55 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 55 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
MCP1407T-E/MF Overview
For greater flexibility, its 8-VDFN Exposed Pad package is used.Tape & Reel (TR) is the packaging method.A total of 1 drivers are integrated into its configuration.It's mounted on the way to Surface Mount.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.IGBT, N-Channel, P-Channel MOSFET is the gate type used for this design.This device can operate at temperatures up to -40°C~125°C.The input type is Non-Inverting.The configuration starts with 8 terminations.There are various related parts under its base part number MCP1407.The device is mounted using Surface Mount.As a result, it is configured with 8 pins when it is designed.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.As a maximum, there is 6A limit to the output current.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board contains 8 pins for component connections.Mosfet gate drivers is recommended that you keep the supply current at 250μA in order to achieve greater stabilMosfet gate driversy.
MCP1407T-E/MF Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP1407T-E/MF Applications
There are a lot of Microchip Technology MCP1407T-E/MF gate drivers applications.
- Broadcast equipment
- Line drivers
- Isolated Supplies for controller area network (CAN),
- Industrial Modules
- RGB applications
- Portable Navigation Devices
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Digitally controlled power supplies
- High current laser/LED systems
- Portable Media Players
