MCP1415T-E/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 390mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1415 |
| Pin Count | 5 |
| Output Voltage | 18V |
| Max Output Current | 1.5A |
| Nominal Supply Current | 150μA |
| Power Dissipation | 390mW |
| Output Current | 1.5A |
| Max Supply Current | 1.1mA |
| Propagation Delay | 55 ns |
| Input Type | Inverting |
| Turn On Delay Time | 55 ns |
| Rise Time | 20ns |
| Fall Time (Typ) | 20 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1415T-E/OT Overview
For greater flexibility, the SC-74A, SOT-753 package is adopted.The packaging method is indicated by Tape & Reel (TR).Configuration is supported by 1 drivers.It's mounted on the way to Surface Mount.In the absence of a power supply voltage of 4.5V~18V V, it is able to demonstrate its superiority.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.This device can operate at temperatures up to -40°C~150°C TJ.A type of Inverting is used for input in this program.It's configured with 5 terminations.Numerous related parts can be found under its base part number MCP1415.The device is mounted with Surface Mount.As a result, it is configured with 5 pins when it is designed.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 1.5A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The component has 5 pins.The output current can be set to 1.5A.Using 390mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.Keeping the supply current at 1.1mA ensures greater stability.A voltage of 18V is output by this device.
MCP1415T-E/OT Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
5 pins
Maximum power dissipation of 390mW
MCP1415T-E/OT Applications
There are a lot of Microchip Technology MCP1415T-E/OT gate drivers applications.
- General Purpose 3-Phase Inverter
- serial peripheral interface (SPI), I2C
- High power buffers
- Pulse transformer drivers
- Industrial Modules
- 3-Phase Motor Inverter Driver
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Topologies
- UPS systems
- Isolated Supplies for controller area network (CAN),
