MCP1416RT-E/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 390mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1416 |
| Pin Count | 5 |
| Max Output Current | 1.5A |
| Nominal Supply Current | 650μA |
| Power Dissipation | 390mW |
| Output Current | 1.5A |
| Max Supply Current | 1.1mA |
| Input Type | Non-Inverting |
| Rise Time | 20ns |
| Fall Time (Typ) | 20 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP1416RT-E/OT Overview
In order to increase flexibility, the package SC-74A, SOT-753 is used.Tape & Reel (TR) represents the package.Gate drivers incorporates wGate driversh 1 drivers for Gate driverss configuration.It's mounted on the way to Surface Mount.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.This device is designed with a IGBT, N-Channel, P-Channel MOSFET gate type.Temperature range -40°C~150°C TJ is allowed for this device.This program uses the input type of Non-Inverting.Mosfet driver consists of 5 terminations as Mosfet drivers foundation.Many related parts can be found under its base part number MCP1416.You mount it with Surface Mount.When the device is designed, it has 5 pins.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.There is an output current limit of 1.5A for this device.There are several useful electronic components found in its subcategory of MOSFET Drivers.The board has 5 component pins.1.5A is the maximum output current supported by the device.Its maximum power dissipation of 390mW shows its power loss capacity without overheating.To maintain higher stability, the supply current should always be 1.1mA.
MCP1416RT-E/OT Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
5 pins
Maximum power dissipation of 390mW
MCP1416RT-E/OT Applications
There are a lot of Microchip Technology MCP1416RT-E/OT gate drivers applications.
- Motor controllers
- Industrial Modules
- Line drivers
- DC/DC converters
- Portable Navigation Devices
- Automotive Applications
- 3-Phase Motor Inverter Driver
- High-speed communications
- Welding
- High power buffers
