MCP1416T-E/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 390mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1416 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Max Output Current | 1.5A |
| Nominal Supply Current | 150μA |
| Power Dissipation | 390mW |
| Output Current | 1.5A |
| Max Supply Current | 1.1mA |
| Propagation Delay | 55 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 55 ns |
| Rise Time | 20ns |
| Fall Time (Typ) | 40 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Input Bias Current | 10μA |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1416T-E/OT Overview
In order to increase flexibility, the package SC-74A, SOT-753 is used.Tape & Reel (TR) represents the package.The device is mounted in the direction of Surface Mount.In the absence of a power supply voltage of 4.5V~18V V, it is able to demonstrate its superiority.There is a gate type of IGBT, N-Channel, P-Channel MOSFET in this design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.The input type is Non-Inverting.The configuration is based on 5 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number MCP1416.The device is mounted using Surface Mount.The pins are configured with 5 when designing the chip.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.Mosfet driver is possible for the output current to be as low as 1.5A.There are several useful electronic components in this subcategory of MOSFET Drivers.There are 5 component pins on the board.The basis of this system consists of 1 outputs.The device is capable of delivering a current of 1.5A.This device has a maximum power dissipation of 390mW, indicating that it is capable of reducing power loss without overheating.Mosfet gate drivers is recommended to keep the supply current at 1.1mA to ensure greater stabilMosfet gate driversy.The voltage it outputs is 18V.
MCP1416T-E/OT Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
5 pins
Maximum power dissipation of 390mW
MCP1416T-E/OT Applications
There are a lot of Microchip Technology MCP1416T-E/OT gate drivers applications.
- Automotive Applications
- Head-up and Head mounted displays
- DC-DC Converters
- Uninterruptible Power Supplies (UPS)
- Commercial air-conditioning (CAC)
- High-speed communications
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Pulse transformer drivers
- Active filtering
- Digitally controlled power supplies
