MCP14628-E/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14628 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 2A |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Propagation Delay | 30 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Turn On Time | 0.03 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.5V 2V |
| High Side Voltage - Max (Bootstrap) | 36V |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14628-E/MF Overview
The 8-VDFN Exposed Pad package provides greater flexibility.Tube represents the package.Gate drivers is mounted in the way of Surface Mount.In the absence of a 4.5V~5.5V supply voltage, its superiority can be demonstrated.A gate type of N-Channel MOSFET is used in its design.This device is allowed to operate in a temperature range of -40°C~125°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Its configuration is based on a total of 8 terminations.You will find various related parts under the base part number MCP14628.Devices are mounted by Surface Mount.At the time of design, it is configured with 8 pins.Specification is for 5V supply voltage operation.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.In the maximum case, the output current can be 2A volts.There are several useful electronic components in this subcategory of MOSFET Drivers.The number of component pins is 8.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 36V.Mosfet driver is based on a basis of 2 outputs that have been integrated.With its power supplies of 5V, it solves the problems of power supply for a variety of applications.In order to operate properly, the operating supply voltage should be set to 5V.
MCP14628-E/MF Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 36V
MCP14628-E/MF Applications
There are a lot of Microchip Technology MCP14628-E/MF gate drivers applications.
- Commercial air-conditioning (CAC)
- High current laser/LED systems
- High frequency line drivers
- Portable Media Players
- Smart Phones
- Digitally controlled power supplies
- Video amplifiers
- Industrial motor drives - compact, standard, premium, servo drives
- Welding
- LCD/LCoS/DLP portable and embedded pico projectors
