MCP14628T-E/MF
| Parameters | |
|---|---|
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.5V 2V |
| High Side Voltage - Max (Bootstrap) | 36V |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14628 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Propagation Delay | 30 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.03 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
MCP14628T-E/MF Overview
The 8-VDFN Exposed Pad package provides greater flexibility.A packaging method of Tape & Reel (TR) is indicated.Configuration is supported by 2 drivers.Surface Mount is mounted in the way.Using a 4.5V~5.5V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.This device is designed with a N-Channel MOSFET gate type.This device is allowed to operate in a temperature range of -40°C~125°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.As a result of its configuration, it contains a maximum of 8 terminations.The base part number MCP14628 refers to a number of related parts.You mount it with Surface Mount.During design, it is configured with 8 pins.A supply voltage of 5V is required for operation.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.As a maximum, there is 2A limit to the output current.This subcategory of MOSFET Drivers has a number of useful electronic components.Components with 8 pins are available.High-side voltage - Max (Bootstrap) can be as low as 36V.Due to its 5V power supply, it can solve power supply problems for an array of diverse applications.Setting the operating supply voltage to 5V is recommended.
MCP14628T-E/MF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 36V
MCP14628T-E/MF Applications
There are a lot of Microchip Technology MCP14628T-E/MF gate drivers applications.
- Motor controllers
- Industrial Modules
- High-voltage isolated DC-DC converters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Motor Drives
- Welding
- RGB applications
- Industrial Motor Inverter - Power Tools, Robotics
- Head-up and Head mounted displays
- 3-Phase Motor Inverter Driver
