MCP14700-E/MF
| Parameters | |
|---|---|
| High Side Voltage - Max (Bootstrap) | 36V |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14700 |
| Pin Count | 8 |
| Output Voltage | 25mV |
| Max Output Current | 3.5A |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Output Current | 2A |
| Propagation Delay | 36 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 36 ns |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Turn-Off Delay Time | 36 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.036 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Turn Off Time | 0.036 μs |
MCP14700-E/MF Overview
For greater flexibility, its 8-VDFN Exposed Pad package is used.Gate drivers is package in Tube case.The configuration is supported by 2 drivers.In this case, gate drivers is mounted along the way of Surface Mount.A supply voltage of 4.5V~5.5V demonstrates its superiority.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~125°C TJ.Input type of Non-Inverting is used.The configuration is based on 8 terminations.The base part number MCP14700 refers to a number of related parts.The device is mounted using Surface Mount.In the device, there are 8 pins.The device is specifically designed to operate at 5V volts.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 3.5A volts.There are various useful electronic components in its subcategory MOSFET Drivers.The board has 8 component pins.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 36V.This device supports a current output of 2A at the output.Due to its power supplies of 5V, it solves the power supply problem for a wide range of applications.In this case, it produces a voltage of 25mV.Mosfet gate drivers is recommended that the operating supply voltage be set to 5V volts.
MCP14700-E/MF Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 36V
MCP14700-E/MF Applications
There are a lot of Microchip Technology MCP14700-E/MF gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Industrial Power Supplies
- Isolated Gate Driver Supplies
- Portable Navigation Devices
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Video amplifiers
- Head-up and Head mounted displays
- High power buffers
- serial peripheral interface (SPI), I2C
- DC/DC converters
