MCP14700T-E/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14700 |
| Pin Count | 8 |
| Max Output Current | 3.5A |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Propagation Delay | 36 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 36 ns |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.036 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Turn Off Time | 0.036 μs |
| High Side Voltage - Max (Bootstrap) | 36V |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP14700T-E/MF Overview
A higher level of flexibility is provided by its 8-VDFN Exposed Pad package.Tape & Reel (TR) represents the packaging method.For its configuration, it incorporates 2 drivers.The device is mounted in the direction of Surface Mount.In the absence of a 4.5V~5.5V supply voltage, it can demonstrate its superiority.Gate type N-Channel MOSFET is designed for it.In this device, temperatures must not exceed -40°C~125°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.8 terminations constitute its foundation.The base part number MCP14700 refers to a number of related parts.Surface Mount is the way it takes to mount the device.The pins are configured with 8 when designing the chip.Specification is for 5V supply voltage operation.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.The maximum output current can amount to 3.5A.There are several useful electronic components within its subcategory MOSFET Drivers.On the board, there are 8 component pins.Maximum (Bootstrap) voltage is 36V.Due to its 5V power supply, it can solve power supply problems for an array of diverse applications.During the operation of the system, the voltage of the operating supply should be set to 5V.
MCP14700T-E/MF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 36V
MCP14700T-E/MF Applications
There are a lot of Microchip Technology MCP14700T-E/MF gate drivers applications.
- Line drivers
- Solar power supplies
- Motor Controls
- Industrial Power Supplies
- RGB applications
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Multicolor LED/laser displays
- Welding
- High-voltage isolated DC-DC converters
- Industrial motor drives - compact, standard, premium, servo drives
