MCP14700T-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14700 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 3.5A |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Propagation Delay | 36 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 36 ns |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.036 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Turn Off Time | 0.036 μs |
| High Side Voltage - Max (Bootstrap) | 36V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MCP14700T-E/SN Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.Tape & Reel (TR) represents the packaging method.The configuration is supported by 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a 4.5V~5.5V supply voltage, its superiority can be demonstrated.There is a gate type of N-Channel MOSFET in this design.There is a temperature range for this device of -40°C~125°C TJ.Input type of Non-Inverting is used.The configuration starts with 8 terminations.Numerous related parts are available for its base part number MCP14700.Surface Mount is the way it takes to mount the device.The pins are configured with 8 when designing the chip.The device is specifically designed to operate at 5V volts.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 3.5A that can be achieved.There are various useful electronic components in its subcategory MOSFET Drivers.The board contains 8 pins for component connections.A boot strap voltage of 36V is the maximum possible high-side voltage.The power supply 5V of the product solves the power supply problem for a variety of applications.Mosfet gate drivers is recommended that you set the operating supply voltage to 5V.
MCP14700T-E/SN Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 36V
MCP14700T-E/SN Applications
There are a lot of Microchip Technology MCP14700T-E/SN gate drivers applications.
- Motor Drives
- Digitally controlled power supplies
- Welding
- High frequency line drivers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Pulse transformer drivers
- Solar power supplies
- Broadcast equipment
- A/D drivers
- High-voltage isolated DC-DC converters
