MCP14A0155T-E/MS
| Parameters | |
|---|---|
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14A0155 |
| JESD-30 Code | S-PDSO-G8 |
| Max Output Current | 1.5A |
| Input Type | Inverting, Non-Inverting |
| Rise / Fall Time (Typ) | 11.5ns 10ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Screening Level | TS 16949 |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
MCP14A0155T-E/MS Overview
There is greater flexibility with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.The packaging method is indicated by Tape & Reel (TR).Configuration is supported by 2 drivers.The device is mounted in the direction of Surface Mount.Using a 4.5V~18V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.There is a gate type of N-Channel, P-Channel MOSFET in this design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.This program uses the input type of Inverting, Non-Inverting.The configuration starts with 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number MCP14A0155.You mount it with Surface Mount.There is an interface IC called HALF BRIDGE BASED MOSFET DRIVER that is employed in this device.There is an output current limit of 1.5A for this device.
MCP14A0155T-E/MS Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
MCP14A0155T-E/MS Applications
There are a lot of Microchip Technology MCP14A0155T-E/MS gate drivers applications.
- Portable computers
- Solar inverters
- Isolated switch mode power supplies (SMPS)
- High frequency line drivers
- Power factor correction (PFC) circuits
- Motor Control
- Commercial air-conditioning (CAC)
- Broadcast equipment
- High power buffers
- AC-DC Inverters
