MCP14A0155T-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14A0155 |
| JESD-30 Code | R-PDSO-G8 |
| Max Output Current | 1.5A |
| Input Type | Inverting, Non-Inverting |
| Rise / Fall Time (Typ) | 11.5ns 10ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Screening Level | TS 16949 |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MCP14A0155T-E/SN Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.There is a package in the form of Tape & Reel (TR).Gate drivers is configured wGate driversh 2 drivers.The device is mounted in the direction of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.This gate type has a N-Channel, P-Channel MOSFET design.In this device, temperatures must not exceed -40°C~150°C TJ.Inverting, Non-Inverting is used as the input type in this program.The configuration starts with 8 terminations.Under its base part number MCP14A0155, various related parts can be found.Devices are mounted by Surface Mount.Mosfet driver employs an interface chip called HALF BRIDGE BASED MOSFET DRIVER as Mosfet drivers interface chip.In the maximum case, the output current can be limited to 1.5A.
MCP14A0155T-E/SN Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
MCP14A0155T-E/SN Applications
There are a lot of Microchip Technology MCP14A0155T-E/SN gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- White Goods - Air Conditioner, Washing Machine,
- High current laser/LED systems
- Telecom switch mode power supplies
- Digitally controlled power supplies
- Solar inverters
- DC/DC converters
- LCD/LCoS/DLP portable and embedded pico projectors
- Active filtering
- General Purpose 3-Phase Inverter
