MCP14E10-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.12W |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | MCP14E10 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 18V |
| Max Output Current | 3A |
| Nominal Supply Current | 1.8mA |
| Power Dissipation | 1.12W |
| Output Current | 3A |
| Max Supply Current | 1.8mA |
| Propagation Delay | 65 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 65 ns |
| Rise Time | 14ns |
| Fall Time (Typ) | 17 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.04 μs |
| Input Current | 1μA |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 4.953mm |
| Length | 10.16mm |
| Width | 7.112mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E10-E/P Overview
Its 8-DIP (0.300, 7.62mm) package is adopted for higher flexibility.Tube is the form of the package.Its recommended mounting way is Through Hole.By using 4.5V~18V supply voltage, it is able to demonstrate its superiority.This device is designed with a IGBT, N-Channel, P-Channel MOSFET gate type.For this device, the temperature range is -40°C~150°C TJ.Non-Inverting is used as the input type.Its configuration starts with 8 terminations.The base part number MCP14E10 refers to a number of related parts.There are 8 pins available in the device.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.The interface chip of the system is HALF BRIDGE BASED MOSFET DRIVER.In the maximum case, the output current can be 3A volts.There are several useful electronic components in this subcategory of MOSFET Drivers.The board contains 8 pins for component connections.There are 2 outputs integrated for its basis.3A is the maximum output current supported by the device.Its maximum power dissipation of 1.12W shows its power loss capacity without overheating.If you want a stable supply current, you should keep it at 1.8mA.In this case, the voltage is 18V.
MCP14E10-E/P Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1.12W
MCP14E10-E/P Applications
There are a lot of Microchip Technology MCP14E10-E/P gate drivers applications.
- White Goods - Air Conditioner, Washing Machine,
- Solar power supplies
- High-voltage isolated DC-DC converters
- Smart Phones
- Active filtering
- RGB applications
- Industrial Motor Inverter - Power Tools, Robotics
- Isolated switch mode power supplies (SMPS)
- Commercial air-conditioning (CAC)
- UPS systems
