MCP14E10-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 699mW |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E10 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 18V |
| Max Output Current | 3A |
| Nominal Supply Current | 1.8mA |
| Output Current | 3A |
| Max Supply Current | 1.8mA |
| Propagation Delay | 65 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 65 ns |
| Rise Time | 14ns |
| Fall Time (Typ) | 17 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.04 μs |
| Input Current | 1μA |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E10-E/SN Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.A packaging method of Tube is used.The device is mounted in the direction of Surface Mount.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.A gate type of IGBT, N-Channel, P-Channel MOSFET has been used in its design.In this device, temperatures must not exceed -40°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.As a result of its configuration, it contains a maximum of 8 terminations.There are various related parts under its base part number MCP14E10.Mosfet driver is mounted using the Surface Mount method.There are 8 pins available in the device.In order to operate, a voltage of 12V has to be applied.In this case, HALF BRIDGE BASED MOSFET DRIVER serves as the interface IC.An output current as high as 3A can be achieved at maximum power.Several electronic components are included in its subcategory of MOSFET Drivers.The board has 8 component pins.For its basis, 2 outputs are integrated.An output current of 3A is supported.This device has a maximum power dissipation of 699mW, indicating that it is capable of reducing power loss without overheating.For higher stability, the supply current should be kept at 1.8mA.The voltage it outputs is 18V.
MCP14E10-E/SN Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 699mW
MCP14E10-E/SN Applications
There are a lot of Microchip Technology MCP14E10-E/SN gate drivers applications.
- Active filtering
- Industrial motor drives - compact, standard, premium, servo drives
- Isolated Supplies for Motor Control
- Power factor correction (PFC) circuits
- PCMCIA applications
- Isolated switch mode power supplies (SMPS)
- LCD/LCoS/DLP portable and embedded pico projectors
- Line drivers
- Automotive Applications
- Portable Navigation Devices
