MCP14E10T-E/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E10 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-N8 |
| Qualification Status | Not Qualified |
| Max Output Current | 3A |
| Power Supplies | 4.5/18V |
| Nominal Supply Current | 1.8mA |
| Output Current | 3A |
| Max Supply Current | 1.8mA |
| Input Type | Non-Inverting |
| Rise Time | 14ns |
| Fall Time (Typ) | 17 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E10T-E/MF Overview
There is greater flexibility with the 8-VDFN Exposed Pad package.The packaging method is indicated by Tape & Reel (TR).This configuration includes 2 drivers.Its recommended mounting way is Surface Mount.When the supply voltage is 4.5V~18V it is able to demonstrate its superiority.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.-40°C~150°C TJ is the allowed temperature range for this device.The input type for this program is Non-Inverting.It's configured with 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number MCP14E10.With a supply voltage of 12V, it is designed to operate.The interface IC of the device is HALF BRIDGE BASED MOSFET DRIVER.3A is the maximum output current.This subcategory of MOSFET Drivers has a number of useful electronic components.A board with 8 component pins is available.The output current supported by the device is 3A.If you want a stable supply current, you should keep it at 1.8mA.With its power supplies of 4.5/18V, it solves the problems of power supply for a variety of applications.
MCP14E10T-E/MF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
MCP14E10T-E/MF Applications
There are a lot of Microchip Technology MCP14E10T-E/MF gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- Solar power supplies
- Smart Phones
- Pulse transformer drivers
- High-voltage isolated DC-DC converters
- UPS systems
- Dual-Battery Systems
- High frequency line drivers
- DC/DC converters
- Power factor correction (PFC) circuits
