MCP14E10T-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 699mW |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E10 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Max Output Current | 3A |
| Power Supplies | 4.5/18V |
| Nominal Supply Current | 1.8mA |
| Output Current | 3A |
| Max Supply Current | 1.8mA |
| Input Type | Non-Inverting |
| Rise Time | 14ns |
| Fall Time (Typ) | 17 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E10T-E/SN Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.The packaging method is indicated by Tape & Reel (TR).The configuration is supported by 2 drivers.Gate drivers is mounted in the way of Surface Mount.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.There is a gate type of IGBT, N-Channel, P-Channel MOSFET in this design.This device can operate at temperatures up to -40°C~150°C TJ.The input type for this program is Non-Inverting.Initially, the configuration is composed of 8 terminations.Numerous related parts can be found under its base part number MCP14E10.A supply voltage of 12V is required for operation.Mosfet driver employs an interface chip called HALF BRIDGE BASED MOSFET DRIVER as Mosfet drivers interface chip.There is an output current limit of 3A for this device.There are several useful electronic components in this subcategory of MOSFET Drivers.A board with 8 component pins is available.An output current of 3A is supported.Considering its maximum power dissipation, 699mW shows its maximum capacity to transfer and conduct power loss without overheating.Mosfet gate drivers is recommended to keep the supply current at 1.8mA to ensure greater stabilMosfet gate driversy.With its power supplies of 4.5/18V, it solves the power supply problems for diverse applications.
MCP14E10T-E/SN Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
Maximum power dissipation of 699mW
MCP14E10T-E/SN Applications
There are a lot of Microchip Technology MCP14E10T-E/SN gate drivers applications.
- Isolated Gate Driver Supplies
- Multicolor LED/laser displays
- Topologies
- Motor Drives
- General Purpose 3-Phase Inverter
- Dual-Battery Systems
- High-speed communications
- Commercial air-conditioning (CAC)
- 3-Phase Motor Inverter Driver
- Active Clamp Flyback or Forward and Synchronous Rectifier
