MCP14E11-E/MF
| Parameters | |
|---|---|
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E11 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 3A |
| Nominal Supply Current | 1.8mA |
| Output Current | 3A |
| Max Supply Current | 1.8mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 14ns |
| Fall Time (Typ) | 17 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 950μm |
| Length | 4.92mm |
| Width | 5.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
MCP14E11-E/MF Overview
In order to increase flexibility, the package 8-VDFN Exposed Pad is used.Tube represents the package.A total of 2 drivers are integrated into its configuration.Surface Mount is the way in which it is mounted.By using 4.5V~18V supply voltage, it is able to demonstrate its superiority.There is a gate type of IGBT, N-Channel, P-Channel MOSFET in this design.For this device, the temperature range is -40°C~150°C TJ.Input type of Inverting, Non-Inverting is used.Initially, the configuration is composed of 8 terminations.There are various related parts under its base part number MCP14E11.During design, it is configured with 8 pins.The device is specifically designed to operate at 12V volts.As its interface IC, HALF BRIDGE BASED MOSFET DRIVER is being employed.There is a maximum output current of 3A.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.On the board, there are 8 component pins.Mosfet driver supports an output current of 3A.Mosfet gate drivers is recommended to keep the supply current at 1.8mA to ensure greater stabilMosfet gate driversy.
MCP14E11-E/MF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP14E11-E/MF Applications
There are a lot of Microchip Technology MCP14E11-E/MF gate drivers applications.
- Video amplifiers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Telecom switch mode power supplies
- Pulse transformer drivers
- Refrigerator
- Isolated Supplies for controller area network (CAN),
- Uninterruptible Power Supplies (UPS)
- Motor Control
- Industrial Modules
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
