MCP14E11-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 699mW |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E11 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Max Output Current | 3A |
| Nominal Supply Current | 1.8mA |
| Output Current | 3A |
| Max Supply Current | 1.8mA |
| Propagation Delay | 65 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 65 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.04 μs |
| Input Current | 1μA |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 1.4986mm |
| Length | 4.8768mm |
| Width | 3.9116mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E11-E/SN Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.A packaging method of Tube is used.Surface Mount is the way in which it is mounted.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.A gate type of IGBT, N-Channel, P-Channel MOSFET is used in its design.For this device, the temperature range is -40°C~150°C TJ.Mosfet driver uses Inverting, Non-Inverting as Mosfet drivers input type.There are 8 terminations to form the base of its configuration.There are numerous related parts listed under its base part number MCP14E11.A total of 8 pins are available on the device.A voltage of 12V is required for its operation.The interface chip of the system is HALF BRIDGE BASED MOSFET DRIVER.In the maximum case, the output current can be 3A volts.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.Components with 8 pins are available.The basis of the model has 2 outputs integrated.This device supports a current output of 3A at the output.Its maximum power dissipation of 699mW also demonstrates its maximum ability to transfer power without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 1.8mA.The voltage it outputs is 18V.
MCP14E11-E/SN Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 699mW
MCP14E11-E/SN Applications
There are a lot of Microchip Technology MCP14E11-E/SN gate drivers applications.
- Motor controllers
- serial peripheral interface (SPI), I2C
- High-voltage isolated DC-DC converters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Industrial Motor Inverter - Power Tools, Robotics
- Isolated Supplies for controller area network (CAN),
- Telecom switch mode power supplies
- DC-DC Converters
- White Goods - Air Conditioner, Washing Machine,
- LCD/LCoS/DLP portable and embedded pico projectors
