MCP14E11T-E/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E11 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-N8 |
| Qualification Status | Not Qualified |
| Max Output Current | 3A |
| Power Supplies | 4.5/18V |
| Nominal Supply Current | 1.8mA |
| Output Current | 3A |
| Max Supply Current | 1.8mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 14ns |
| Fall Time (Typ) | 17 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E11T-E/MF Overview
Its 8-VDFN Exposed Pad package is adopted for higher flexibility.There is a package in the form of Tape & Reel (TR).Configuration is supported by 2 drivers.In the direction of Surface Mount, gate drivers is mounted.A supply voltage of 4.5V~18V demonstrates its superiority.A gate type of IGBT, N-Channel, P-Channel MOSFET is used in its design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.A type of Inverting, Non-Inverting is used for input in this program.It's configured with 8 terminations.Numerous related parts can be found under its base part number MCP14E11.Specification is for 12V supply voltage operation.Mosfet driver employs an interface chip called HALF BRIDGE BASED MOSFET DRIVER as Mosfet drivers interface chip.In the maximum case, the output current can be limited to 3A.There are several useful electronic components in this subcategory of MOSFET Drivers.The board contains 8 pins for component connections.Mosfet driver supports an output current of 3A.Mosfet gate drivers is recommended that you keep the supply current at 1.8mA in order to achieve greater stabilMosfet gate driversy.With its power supplies of 4.5/18V, it solves the power supply problems for diverse applications.
MCP14E11T-E/MF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
MCP14E11T-E/MF Applications
There are a lot of Microchip Technology MCP14E11T-E/MF gate drivers applications.
- RGB applications
- Telecom switch mode power supplies
- Isolated Supplies for Motor Control
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Industrial Power Supplies
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Welding
- Refrigerator
- High current laser/LED systems
- High-speed communications
