MCP14E11T-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 699mW |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E11 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Max Output Current | 3A |
| Power Supplies | 4.5/18V |
| Nominal Supply Current | 1.8mA |
| Output Current | 3A |
| Max Supply Current | 1.8mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 14ns |
| Fall Time (Typ) | 17 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E11T-E/SN Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.Gate drivers is package in Tape & Reel (TR) case.This configuration includes 2 drivers.In this case, gate drivers is mounted along the way of Surface Mount.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.In this device, temperatures must not exceed -40°C~150°C TJ.The input type is Inverting, Non-Inverting.Mosfet driver is based on 8 terminations.There are numerous related parts listed under its base part number MCP14E11.A supply voltage of 12V is required for operation.There is an interface IC called HALF BRIDGE BASED MOSFET DRIVER that is employed in this device.An output current as high as 3A can be achieved at maximum power.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.The board contains 8 pins for component connections.An output current of 3A is supported.Its maximum power dissipation of 699mW shows its power loss capacity without overheating.Mosfet gate drivers is recommended that you keep the supply current at 1.8mA in order to achieve greater stabilMosfet gate driversy.With its power supplies of 4.5/18V, it solves the power supply problems for diverse applications.
MCP14E11T-E/SN Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
Maximum power dissipation of 699mW
MCP14E11T-E/SN Applications
There are a lot of Microchip Technology MCP14E11T-E/SN gate drivers applications.
- Motor Drives
- Uninterruptible Power Supplies (UPS)
- Industrial motor drives - compact, standard, premium, servo drives
- Welding
- Portable Media Players
- serial peripheral interface (SPI), I2C
- High-voltage isolated DC-DC converters
- UPS systems
- Solar inverters
- High-speed communications
