MCP14E3-E/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E3 |
| Pin Count | 8 |
| Max Output Current | 4A |
| Nominal Supply Current | 2mA |
| Max Supply Current | 2mA |
| Propagation Delay | 60 ns |
| Input Type | Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | PUSH-PULL BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.07 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.07 μs |
| Height Seated (Max) | 1mm |
| Length | 5.99mm |
| Width | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E3-E/MF Overview
There is greater flexibility with the 8-VDFN Exposed Pad package.Gate drivers is package in Tube case.There are 2 drivers installed for this device.Gate drivers is mounted in the way of Surface Mount.A supply voltage of 4.5V~18V demonstrates its superiority.Gate type IGBT, N-Channel, P-Channel MOSFET is designed for it.There is a temperature range for this device of -40°C~150°C TJ.Inverting is the input type used in this program.There are 8 terminations to form the base of its configuration.There are numerous related parts listed under its base part number MCP14E3.The mount method is Surface Mount.There are 8 pins available in the device.The device is specifically designed to operate at 12V volts.In this case, PUSH-PULL BASED MOSFET DRIVER serves as the interface IC.Mosfet driver is possible for the output current to be as low as 4A.There are various useful electronic components in its subcategory MOSFET Drivers.There are 8 component pins on the board.As a precaution, make sure the supply current is kept at 2mA.
MCP14E3-E/MF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP14E3-E/MF Applications
There are a lot of Microchip Technology MCP14E3-E/MF gate drivers applications.
- serial peripheral interface (SPI), I2C
- Commercial air-conditioning (CAC)
- Solar inverters
- Refrigerator
- Isolated Supplies for controller area network (CAN),
- Active Clamp Flyback or Forward and Synchronous Rectifier
- DC-DC Converters
- Topologies
- Isolated Gate Driver Supplies
- Industrial Motor Inverter - Power Tools, Robotics
