MCP14E3-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 665mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E3 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 17.975V |
| Max Output Current | 4A |
| Nominal Supply Current | 750μA |
| Power Dissipation | 665mW |
| Output Current | 4A |
| Max Supply Current | 2mA |
| Propagation Delay | 60 ns |
| Input Type | Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | PUSH-PULL BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.07 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.07 μs |
| Height | 1.4986mm |
| Length | 4.8768mm |
| Width | 3.9116mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E3-E/SN Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.A packaging method of Tube is indicated.Surface Mount is mounted in the way.In the absence of a power supply voltage of 4.5V~18V V, it is able to demonstrate its superiority.Gate type IGBT, N-Channel, P-Channel MOSFET has been used in its design.For this device, the temperature range is -40°C~150°C TJ.A type of Inverting is used for input in this program.As a result of its configuration, it contains a maximum of 8 terminations.The base part number MCP14E3 refers to a number of related parts.Devices are mounted by Surface Mount.During design, it is configured with 8 pins.In order to operate, a voltage of 12V has to be applied.Mosfet driver employs an interface chip called PUSH-PULL BASED MOSFET DRIVER as Mosfet drivers interface chip.The maximum output current can amount to 4A.There are several useful electronic components found in its subcategory of MOSFET Drivers.The number of component pins is 8.The basis of the model has 2 outputs integrated.4A is the maximum output current supported by the device.Considering its maximum power dissipation, 665mW shows its maximum capacity to transfer and conduct power loss without overheating.To increase stability, keep the supply current at 2mA.Mosfet gate drivers outputs 17.975V as voltage.
MCP14E3-E/SN Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 665mW
MCP14E3-E/SN Applications
There are a lot of Microchip Technology MCP14E3-E/SN gate drivers applications.
- High-speed communications
- Welding
- Industrial Motor Inverter - Power Tools, Robotics
- Multicolor LED/laser displays
- UPS systems
- Motor controllers
- Motor Control
- Isolated Supplies for Motor Control
- Industrial Power Supplies
- Commercial air-conditioning (CAC)
