MCP14E3T-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 665mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E3 |
| Pin Count | 8 |
| Max Output Current | 4A |
| Nominal Supply Current | 750μA |
| Power Dissipation | 665mW |
| Output Current | 4A |
| Max Supply Current | 2mA |
| Propagation Delay | 60 ns |
| Input Type | Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 15ns |
| Fall Time (Typ) | 18 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | PUSH-PULL BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.07 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.07 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP14E3T-E/SN Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) represents the packaging method.Configuration is supported by 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.When the supply voltage is 4.5V~18V it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of IGBT, N-Channel, P-Channel MOSFET.-40°C~150°C TJ is the allowed temperature range for this device.A type of Inverting is used for input in this program.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Numerous related parts can be found under its base part number MCP14E3.The mount method is Surface Mount.When designing, the device is configured with 8 pins.Mosfet driver is designed specifically to run on 12V volts of power.Mosfet driver utilizes the interface IC PUSH-PULL BASED MOSFET DRIVER.In the maximum case, the output current can be 4A volts.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.There are 8 component pins on the board.An output current of 4A is supported.Having the maximum power dissipation of 665mW indicates its maximum capacity to conduct power losses without overheating.To ensure high stability, the supply current should be kept at 2mA.
MCP14E3T-E/SN Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 665mW
MCP14E3T-E/SN Applications
There are a lot of Microchip Technology MCP14E3T-E/SN gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- Welding
- High-speed communications
- Industrial Motor Inverter - Power Tools, Robotics
- RGB applications
- Portable computers
- DC/DC converters
- High-voltage isolated DC-DC converters
- Dual-Battery Systems
- Automotive Applications
