MCP14E4-E/MF
| Parameters | |
|---|---|
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E4 |
| Pin Count | 8 |
| Max Output Current | 4A |
| Nominal Supply Current | 2mA |
| Max Supply Current | 2mA |
| Propagation Delay | 60 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | PUSH-PULL BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.07 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.07 μs |
| Height Seated (Max) | 1mm |
| Length | 5.99mm |
| Width | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
MCP14E4-E/MF Overview
Gate drivers provides greater flexibilGate driversy to use the 8-VDFN Exposed Pad package.A package of Tube has been used.Gate drivers is configured wGate driversh 2 drivers.In the direction of Surface Mount, gate drivers is mounted.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~18V.This gate type has a IGBT, N-Channel, P-Channel MOSFET design.This device can operate at temperatures up to -40°C~150°C TJ.Non-Inverting is used as the input type in this program.As a result of its configuration, it contains a maximum of 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number MCP14E4.Mosfet driver is mounted using Surface Mount.At the time of design, it is configured with 8 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.Mosfet driver utilizes the interface IC PUSH-PULL BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 4A.Several electronic components are included in its subcategory of MOSFET Drivers.8 pins are present on the component.The supply current should be kept at 2mA to ensure higher stability.
MCP14E4-E/MF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP14E4-E/MF Applications
There are a lot of Microchip Technology MCP14E4-E/MF gate drivers applications.
- Commercial and agricultural vehicles (CAV)
- Uninterruptible Power Supplies (UPS)
- Industrial motor drives - compact, standard, premium, servo drives
- High-speed communications
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Pulse transformer drivers
- Isolated switch mode power supplies (SMPS)
- Portable Navigation Devices
- LCD/LCoS/DLP portable and embedded pico projectors
- Active filtering
