MCP14E4-E/P
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.1W |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | MCP14E4 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 17.975V |
| Max Output Current | 4A |
| Nominal Supply Current | 750μA |
| Power Dissipation | 1.1W |
| Output Current | 4A |
| Max Supply Current | 2mA |
| Propagation Delay | 60 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 15ns |
| Fall Time (Typ) | 18 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | PUSH-PULL BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.07 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.07 μs |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
MCP14E4-E/P Overview
The 8-DIP (0.300, 7.62mm) package offers greater flexibility.Tube represents the package.Ideally, it should be mounted in the direction of Through Hole.Using a 4.5V~18V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.A gate type of IGBT, N-Channel, P-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.This program uses the input type of Non-Inverting.Its configuration starts with 8 terminations.The base part number MCP14E4 refers to a number of related parts.Mounting the device requires Through Hole.When the device is designed, it has 8 pins.This device operates with 12V supply voltage.The interface chip of the system is PUSH-PULL BASED MOSFET DRIVER.There is an output current limit of 4A for this device.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.Components with 8 pins are available.The basis of the model has 2 outputs integrated.This device supports a current output of 4A at the output.The maximum power dissipation of 1.1W shows its maximum capability to transfer and conduct power loss without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 2mA.Mosfet gate drivers produces a voltage of 17.975V.
MCP14E4-E/P Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1.1W
MCP14E4-E/P Applications
There are a lot of Microchip Technology MCP14E4-E/P gate drivers applications.
- Isolated Supplies for Motor Control
- DC-DC Converters
- Industrial Power Supplies
- Isolated Gate Driver Supplies
- Commercial air-conditioning (CAC)
- General Purpose 3-Phase Inverter
- High frequency line drivers
- Topologies
- Refrigerator
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
