MCP14E4T-E/SN
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 665mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E4 |
| Pin Count | 8 |
| Max Output Current | 4A |
| Nominal Supply Current | 750μA |
| Power Dissipation | 665mW |
| Output Current | 4A |
| Max Supply Current | 2mA |
| Propagation Delay | 60 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 15ns |
| Fall Time (Typ) | 18 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | PUSH-PULL BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.07 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.07 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
MCP14E4T-E/SN Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.There is a package in the form of Tape & Reel (TR).For its configuration, it incorporates 2 drivers.Surface Mount is mounted in the way.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.IGBT, N-Channel, P-Channel MOSFET is the gate type used for this design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.The input type is Non-Inverting.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Numerous related parts are available for its base part number MCP14E4.In this case, Surface Mount indicates how the device is mounted.Devices have 8 pins available.A supply voltage of 12V is required for operation.The interface IC is referred to as PUSH-PULL BASED MOSFET DRIVER.There is a maximum output current of 4A that can be achieved.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.There are 8 component pins on the board.An output current of 4A is supported.665mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.For higher stability, the supply current should be kept at 2mA.
MCP14E4T-E/SN Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 665mW
MCP14E4T-E/SN Applications
There are a lot of Microchip Technology MCP14E4T-E/SN gate drivers applications.
- Welding
- Industrial Modules
- Broadcast equipment
- Motor controllers
- Multicolor LED/laser displays
- Telecom switch mode power supplies
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Commercial and agricultural vehicles (CAV)
- High current laser/LED systems
- Refrigerator
