MCP14E5-E/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E5 |
| Pin Count | 8 |
| Max Output Current | 4A |
| Nominal Supply Current | 2mA |
| Max Supply Current | 2mA |
| Propagation Delay | 60 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | PUSH-PULL BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.07 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.07 μs |
| Height Seated (Max) | 1mm |
| Length | 5.99mm |
| Width | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E5-E/MF Overview
In order to increase flexibility, the package 8-VDFN Exposed Pad is used.Gate drivers is packaged in the way of Tube.The configuration is supported by 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.A gate type of IGBT, N-Channel, P-Channel MOSFET is used in its design.In this device, temperatures must not exceed -40°C~150°C TJ.Input type of Inverting, Non-Inverting is used.8 terminations constitute its foundation.The base part number MCP14E5 refers to a number of related parts.Mosfet driver is mounted using Surface Mount.Devices have 8 pins available.The device is specifically designed to function with a supply voltage of 12V V.Mosfet driver utilizes the interface IC PUSH-PULL BASED MOSFET DRIVER.The maximum output current can amount to 4A.Its subcategory of MOSFET Drivers contains various useful electronic components.The number of component pins is 8.In order to ensure greater stability, it is recommended to keep the supply current at 2mA.
MCP14E5-E/MF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP14E5-E/MF Applications
There are a lot of Microchip Technology MCP14E5-E/MF gate drivers applications.
- Isolated Supplies for controller area network (CAN),
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Commercial and agricultural vehicles (CAV)
- Isolated Supplies for Motor Control
- Dual-Battery Systems
- serial peripheral interface (SPI), I2C
- Video amplifiers
- Solar power supplies
- Isolated Gate Driver Supplies
- DC/DC converters
