MCP14E5-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 665mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E5 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 17.975V |
| Max Output Current | 4A |
| Nominal Supply Current | 750μA |
| Power Dissipation | 665mW |
| Output Current | 4A |
| Max Supply Current | 2mA |
| Propagation Delay | 60 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | PUSH-PULL BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.07 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.07 μs |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E5-E/SN Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Tube represents the package.It's mounted on the way to Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.A gate type of IGBT, N-Channel, P-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.A type of Inverting, Non-Inverting is used for input in this program.Its configuration is based on a total of 8 terminations.Many related parts can be found under its base part number MCP14E5.The device is mounted using Surface Mount.In the device, there are 8 pins.Specification is for 12V supply voltage operation.As its interface IC, PUSH-PULL BASED MOSFET DRIVER is being employed.Mosfet driver is possible for the output current to be as low as 4A.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.A board with 8 component pins is available.The basis of the model has 2 outputs integrated.An output current of 4A is supported.665mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.To maintain higher stability, the supply current should always be 2mA.In this case, the voltage is 17.975V.
MCP14E5-E/SN Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 665mW
MCP14E5-E/SN Applications
There are a lot of Microchip Technology MCP14E5-E/SN gate drivers applications.
- Isolated Supplies for Motor Control
- Commercial air-conditioning (CAC)
- Automotive Applications
- Isolated switch mode power supplies (SMPS)
- High-speed communications
- Line drivers
- Smart Phones
- DC/DC converters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Multicolor LED/laser displays
