MCP14E5T-E/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E5 |
| Pin Count | 8 |
| Max Output Current | 4A |
| Nominal Supply Current | 2mA |
| Max Supply Current | 2mA |
| Propagation Delay | 60 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | PUSH-PULL BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.07 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.07 μs |
| Height Seated (Max) | 1mm |
| Length | 5.99mm |
| Width | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E5T-E/MF Overview
The 8-VDFN Exposed Pad package offers greater flexibility.A packaging method of Tape & Reel (TR) is used.There are 2 drivers installed for this device.It's mounted on the way to Surface Mount.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.This device is designed with a IGBT, N-Channel, P-Channel MOSFET gate type.In this device, temperatures must not exceed -40°C~150°C TJ.The input type for this program is Inverting, Non-Inverting.Its configuration is based on a total of 8 terminations.Numerous related parts are available for its base part number MCP14E5.Mosfet driver is mounted using the Surface Mount method.There are 8 pins available in the device.Mosfet driver is designed specifically to run on 12V volts of power.Mosfet driver employs an interface chip called PUSH-PULL BASED MOSFET DRIVER as Mosfet drivers interface chip.There is a maximum output current of 4A that can be achieved.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.A total of 8 pins are available for component connections.To maintain higher stability, the supply current should always be 2mA.
MCP14E5T-E/MF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP14E5T-E/MF Applications
There are a lot of Microchip Technology MCP14E5T-E/MF gate drivers applications.
- Solar power supplies
- Power factor correction (PFC) circuits
- Industrial Modules
- 3-Phase Motor Inverter Driver
- RGB applications
- Industrial Motor Inverter - Power Tools, Robotics
- High frequency line drivers
- Head-up and Head mounted displays
- White Goods - Air Conditioner, Washing Machine,
- Automotive Applications
