MCP14E6-E/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E6 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Nominal Supply Current | 1.8mA |
| Output Current | 2A |
| Max Supply Current | 1.8mA |
| Input Type | Inverting |
| Rise Time | 12ns |
| Fall Time (Typ) | 15 ns |
| Rise / Fall Time (Typ) | 12ns 15ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.035 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 950μm |
| Length | 4.92mm |
| Width | 5.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E6-E/MF Overview
The 8-VDFN Exposed Pad package offers greater flexibility.There is a package in the form of Tube.Configuration is supported by 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.A supply voltage of 4.5V~18V demonstrates its superiority.There is a gate type of IGBT, N-Channel, P-Channel MOSFET in this design.Temperature range -40°C~150°C TJ is allowed for this device.The input type is Inverting.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Under its base part number MCP14E6, various related parts can be found.Devices have 8 pins available.In order to operate, a voltage of 12V has to be applied.The interface IC of the device is HALF BRIDGE BASED MOSFET DRIVER.There is a maximum output current of 2A.There are several useful electronic components within its subcategory MOSFET Drivers.There are 8 component pins on the board.Mosfet driver supports an output current of 2A.If you want a stable supply current, you should keep it at 1.8mA.
MCP14E6-E/MF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP14E6-E/MF Applications
There are a lot of Microchip Technology MCP14E6-E/MF gate drivers applications.
- AC-DC Inverters
- High-speed communications
- Industrial Power Supplies
- Active filtering
- Solar power supplies
- DC/DC converters
- High power buffers
- Motor controllers
- Topologies
- 3-Phase Motor Inverter Driver
